Thermostat - Overtemperature - GE Monogram ZBD6400 Series Technical Service Manual

6000 & 7000 Series DISHWASHERS

5.2.29 Thermostat - Overtemperature

CAUTION. Switch off electrical power supply
and turn off water supply at main or isolating
valve.
5.2.29.1 The overtemperature thermostat is located in the
base of the tub alongside the wash motor capacitor.
To release the thermostat grasp the plastic body and tilt it to
one side, at the same time moving one lip of the rubber
gasket it is mounted in to one side. Lift the thermostat clear
and remove the two 1/4" terminals and wires from the tub
connections.
Tub Base
Rubber Mounting Gasket
Reassemble in reverse order.
Note: Ensure both lips of the gasket capture the metal
thermostat flange on reassembly.
5.2.29.2 Operate and test dishwasher before leaving.
Overtemperature Thermostat
PAGE 49