GE Monogram ZBD6800KBB Dimensions And Specifications

ZBD6880KSS
ZBD6800KWW/BB – GE Monogram Fully Integrated Built-In Dishwasher
Dimensions and Specifications (in inches)
• The dishwasher must be installed so that the drain hose is no
more than 10 feet in length for proper drainage.
• Water and power supply should enter in the shaded area.
• Electrical and water connections are at the right front of the
dishwasher. The hot water line should extend forward 30" to
40" from the rear wall. The electrical must extend forward at
least 24" to reach the junction box.
• To prevent siphoning, an air gap must be used when the
waste tee or disposer connection is less than 18" above
the floor.

Electrical Requirements

The dishwasher must be supplied with 120V, 60Hz, and connected
to an individual properly grounded branch circuit protected by a
15- or 20-amp circuit breaker or time-delay fuse.
Specification Revised 8/04
150041
This Wall Area Must be
Free of Pipes or Wires
4"
34" to 35"
Floor to
Underside of
Countertop
24"
Plumbing and Electric Service
Must Enter Inside This Area
Listed by
Underwriters
Laboratories
R
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR guidelines
for energy efficiency.
For answers to your Monogram,
GE appliance questions, visit our website at
®
GEAppliances.com or call GE Answer Center
service, 800.626.2000.
24"
min.
6"
34" - 35"*
24"
24"
GE Profile or
® ™
®