Back Height Adjustment; Back Angle Adjustment - Invacare Top End T-3 Tennis Adjustable Operating And Maintenance Manual

BACK
BACK HEIGHT ADJUSTMENT (FIGURE 3)
NOTE: This procedure is for adjustable back chairs only.
NOTE: Note tautness of back upholstery for reinstallation.
1. Unlatch the two (2) fastening flaps that secure the top of the back upholstery to the back
canes and remove from the back canes.
Push pin MUST be protruding through hole in back cane.
Ensure that both back cane inserts are at the same height BEFORE reassembling
chair.
2. Press the push pin on the back cane insert tube in and adjust the back height to one (1)
of four (4) heights depending on original back height:
Original Back
Height (in inches)
11-14 10
14-18 13
16-20 16
Holes numbered from bottom to top for reference only. (There are no numbers on the back canes.)
*
3. Reinstall the fastening flaps onto the back canes.
NOTE: The fastening flap with the Invacare Top End logo is for the left back cane when standing behind
the chair.
4. Adjust the NEW back upholstery to the desired tautness. Refer to ADJUSTING/RE-
PLACING BACK UPHOLSTERY in this procedure of the manual.
Back Cane
FIGURE 3 - BACK HEIGHT ADJUSTMENT
BACK ANGLE ADJUSTMENT (FIGURE 4)
NOTE: This procedure is for fold down back chairs only.
NOTE: DO NOT remove the hex screws that secure the back angle bracket to the chair frame and
back cane.
NOTE: Perform procedure to both sides at the same time.
1. Loosen the locknuts and hex screws that secure the back angle bracket to the chair
frame and the back cane.
T-3™ and T-4™ Series
WARNING
* HOLE #
1 2 3 4
11 12 13
14 15 16
17 18 N/A
24
PROCEDURE 3
HOLE NUMBER
4
3
2
1
Part No. 1054916