Adjusting Toe In/Toe Out - Invacare Top End T-3 Tennis Adjustable Operating And Maintenance Manual

WHEELS

ADJUSTING TOE IN/TOE OUT

DEGREE OF CAMBER HAS BEEN CHANGED - T-3 ADJUSTABLE
MODELS AND T-3 ELITE MODELS WITH ADJUSTABLE CAMBER
TUBES ONLY
Axle Tube Positioning For 0°/3°, 0°/6°, 3°/6° Or 9°/12° Camber Inserts
(FIGURE 8).
DO NOT rotate the axle tube if the axle tube is locked out by the toe adjust-
ment rings. If a locked out axle tube is rotated, damage to the toe adjustment
rings will occur.
NOTE: Refer to AXLE TUBE POSITIONING FOR 0°/3°, 0°/6°, 3°/6° or 9°/12° CAMBER INSERTS in
FIGURE 8 for a description of a locked out axle tube.
There is NO adjustment required to maintain a correct toe in/toe out measurement.
NOTE: The axle tube will be locked out by the toe adjustment rings and will NOT rotate.
AXLE TUBE POSITIONING FOR 0°/3°, 0°/6°, 3°/6° OR 9°/12°
Toe Adjustment Ring
Left Tab Stopped Against
Lower Metal Tab on
Frame Bracket
FIGURE 8 - ADJUSTING TOE IN/TOE OUT - DEGREE OF CAMBER HAS
Part No. 1054916
CAUTION
CAMBER INSERTS
NO ADJUSTMENT REQUIRED
Axle Tube - LOCKED OUT by
Toe Adjustment Rings and Will
NOT Rotate
BEEN CHANGED
37
PROCEDURE 6
Right Tab Stopped Against Upper
Metal Tab on Frame Bracket
Toe
Adjustment
Ring
T-3™ and T-4™ Series