Folding Back; Replacing Back Upholstery - Invacare Top End T-3 Tennis Adjustable Operating And Maintenance Manual

BACK

REPLACING BACK UPHOLSTERY

1. Unlatch the two (2) fastening flaps that secure the top of the back upholstery to the back
canes.
2. Remove the fastening flaps from the back canes by lifting straight up.
3. Remove the seat cushion.
4. Separate bottom of back upholstery from either underside or top of seat upholstery
(depending on back style).
5. Install NEW fastening flaps onto the back canes.
NOTE: The fastening flap with the Invacare Top End logo is for the left back cane.
6. Securely latch the back upholstery to the fasteners on either the underside or top of the
seat upholstery (depending on back style).
7. Adjust the NEW upholstery to the desired tautness. Refer to ADJUSTING BACK
UPHOLSTERY in this procedure of the manual.
FOLDING BACK (FIGURE 2)
NOTE: This procedure is for folding back chairs only.
Back MUST be locked securely in place before using the chair.
1. Lift up on the back and pull towards the rear of the chair until it locks into place.
2. To fold the back, pull up on the black nylon cord and push the back forward.
Part No. 1054916
WARNING
Back Cane
Seat Frame
FIGURE 2 - FOLDING BACK
23
PROCEDURE 3
T-3™ and T-4™ Series