Opening/Closing Clamps - Invacare Top End T-3 Tennis Adjustable Operating And Maintenance Manual

WHEELS
OPENING/CLOSING CLAMPS (FIGURE 6)
QUICK RELEASE LEVERS - Make sure the quick-release levers are in the CLOSED
position BEFORE using the wheelchair, otherwise personal injury or damage to the
wheelchair may result.
STANDARD CAMBER CLAMPS - Make sure the hex screws and locknuts are securely
tightened BEFORE using the wheelchair, otherwise personal injury or damage to the
wheelchair may result.
A-4 CAMBER SYSTEM ONLY - DO NOT close the quick-release levers or tighten
the hex screws and locknuts without camber inserts in the axle tube. Damage to
the axle tube will occur.
1. Perform one (1) of the following to open a camber clamp:
A. QUICK-RELEASE LEVERS - Pull the quick-release lever to the open position.
B. STANDARD CAMBER CLAMPS - Loosen, but do not remove the hex screw and
locknut on the camber clamp.
2. Perform one (1) of the following to close a camber clamp:
A. QUICK-RELEASE LEVERS - Push the quick-release lever on the camber clamps
to the closed position.
B. STANDARD CAMBER CLAMPS - Securely tighten the hex screw and locknut to
secure the axle tube.
QUICK-RELEASE LEVER
CLOSED
POSITION
Quick-Release
Lever
OPEN POSITION
FIGURE 6 - OPENING/CLOSING CLAMPS
Part No. 1054916
WARNING
CAUTION
STANDARD
Hex Screw and Locknut
35
PROCEDURE 6
T-3™ and T-4™ Series