Table of Contents
Advertisement
5. Mount the switch on the wall using the wall mounting screws (not
provided), as shown in Figure 7.
Figure 7. Mounting The Switch on the Wall
6. Refer to "Cabling and Powering on the Switch" on page 43 to attach
ethernet cables and power cable.
7. To prevent accidental disconnection of the AC power cord, fasten the
power cord to the wall with the appropriate cable fastener hardware
(not provided) within six inches of the AT-FS708/POE Fast Ethernet
switch back panel.
AT-FS708/POE Fast Ethernet Switch Installation Guide
778
37
Advertisement
Table of Contents
