Installation & Service Tools - Jøtul GI 350 DV Scan 65i Installation And Operation Instructions Manual

pLEASE READ THESE INSTRUCTIONS IN THEIR
ENTIRETY AND MAKE THEM AVAILAbLE TO
ANYONE USING OR SERVICING THIS AppLIANCE.
This producT musT be insTalled by a
licensed masTer or journeyman plumber
or gas-fiTTer when insTalled in The com-
monwealTh of massachuseTTs.
We recommend that our gas
products be installed and
serviced by professionals who
are certified in the U.S. by the
National Fireplace Institute®
(NFI) as NFI Gas Specialists.
Suggested Tools for
Installation and Service
• External regulator (for Propane only)
• Piping which complies with local code
• Manual shut-off valve -
T-Handle required in Massachusetts
• Sediment trap - if required by code
• Tee joint
• Pipe wrench
• Pipe sealant
• 10 mm open end wrench
• 1/2", 7/16" open end wrench
• Phillips head screwdriver
• Flat head screwdriver
• 1/4" nut driver
• Gloves
• Safety glasses
• Torx T-20 screwdriver