Adjusting The Headlight Beam - Yamaha YJ50RAP Service Manual

REPLACING THE HEADLIGHT BULB/

ADJUSTING THE HEADLIGHT BEAM

3 - 36
6. Install:
• headlight bulb
New
Secure the new headlight bulb with the
headlight bulb holder.
CAUTION:
@
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
7. Attach:
• headlight bulb holder
8. Install:
• headlight bulb holder cover
9. Connect:
• headlight coupler
10.Install:
• Headlight cover
Refer to "FRONT PANEL AND LEG
SHILD".
EAS00184
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• headlight beam (vertically)
a. Loosen the adjusting screw 1 and push the
headlight lens unit in direction a or b.
Headlight beam is
Direction a
raised.
Headlight beam is low-
Direction b
ered.
CHK
ADJ