Installing The Brake Shoes; Installing The Rear Wheel - Yamaha YJ50RAP Service Manual

1
REAR WHEEL AND BRAKE
EAS00573

INSTALLING THE BRAKE SHOES

1. Install:
• brake camshaft lever 1
NOTE:
@
• Align the punch mark a in the brake cam-
shaft with the mark b on the brake camshaft
lever.
• Lubricate the brake camshaft and pin with
lithium soap base grease.
WARNING
@
After installing the rear brake camshaft,
remove any excess grease.
2. Install:
• brake shoes
NOTE:
@
Do not to damage the springs during installa-
tion.

INSTALLING THE REAR WHEEL

1. Tighten:
• wheel axle nut
CAUTION:
@
Do not loosen the wheel axle nut after tight-
ening it to the specified torque.
2. Install:
• rear brake cable
• adjuster
3. Adjust:
• brake lever free play
Refer to "ADJUSTING THE REAR BRAKE"
in chapter 3.
4 - 14
CHAS
105 Nm (10.5 m · kg, 75 ft · lb)