Nortrac 35XT Owner's Manual page 95

Component
ATTENTION:
Before using farm implements, operators should carefully read the "Use and Maintenance
Instructions" and understand the structure, performance, operation, and supporting features to avoid damaging the
implements and/or personal injury.
NOTES:
1. Before purchasing farm machines and implements, select a good match with your machine or
consult a reputable dealer. Understand your operational conditions (soil resistance, agricultural
requirements, etc.) of the areas where you will be working and referring to this list.
2. Determine the main technical parameters of the farm machines and implements such as models
according to the operational conditions (soil resistance, agricultural requirements, etc.) of the areas
where you will working and refer to the advisories in order to get the appropriate match. Improper
matching will make the new machinery ineffective and, possibly, dangerous.
3. Working efficiency can depend on the implement, the performance of which may vary with
operational conditions (soil resistance, agricultural requirements, etc.). Therefore, you should
determine working speed and width, etc. and make your purchase accordingly.
Appendices
Specification
80×3.55G
85×3.55G
170×3.55G
175×3.55G
Distributed by Northern Tool & Equipment Co., Inc.
Burnsville, MN 55306-6936
Made in China
89
Assembly Position
Back Support
Bearing Block of the Mater
Pinion Shaft
Drive Shaft Cover
Inner End of the Half Axle
Sleeve
Qty.
2
2
2
2