front drive axle according to the specifications.
•
Carry out the technical maintenance for the diesel engine according to the specifications of the Diesel Engine
Use and Maintenance Operation Manual.
•
Drain the engine coolant then add new coolant, with a 50/50 water/antifreeze mixture. Never run the engine
without coolant in the cooling system.
•
Check the toe-in of the front wheels and the free play of the clutch and brake pedals. Adjust them if
necessary.
•
Check all bolts, nuts and screws and tighten if necessary.
•
Add grease to each grease fitting on the tractor according to the maintenance table.
IMPORTANT ISSUES:
1. Tractors that have just left the factory, or have just been overhauled, should be broken-in before they are put into
normal service. Otherwise, their service lives will be reduced.
2.
Drivers should first learn and master the operations of the tractor before doing the break-in.
Operation Description
41