Main Bolts, Screws And Nuts Tightening Torque - Nortrac 35XT Owner's Manual

10.2

Main Bolts, Screws and Nuts Tightening Torque

Table 10-2 Main Bolts, Screws, and Nuts Tightening Torque Table
Name and Assembly Position
The bolt and nut connecting the engine and the
clutch housing.
The bolt connecting the clutch housing and the
rear axle casing.
The bolt securing the bearing block of the primary
shaft and the secondary shaft.
The bolt securing the interlocking wedge.
The bolt connecting the slave drive spiral bevel
gear.
The bolts connecting the drive shaft shell and the
rear axle housing.
The bolt connecting the driving wheel hub and the
radial plate.
The lock nut that locks the front shaft cross bar.
The bolt connecting the subassembly of the front
outer shaft and the front inner shaft.
The bolt connecting the front driving wheel, the
front wheel hub and the radial plate.
The bolt connecting the front axle and the bracket.
The bolt connecting the front bracket and the
battery tray.
The bolt connecting the bracket and the engine.
The bolt connecting the bracket and the engine.
The bolt connecting the lifter shell and the rear
axle housing.
The bolt connecting the steering gear and the
clutch housing.
The coupling bolt for the limited rod support.
Appendices
Thread
Specification
M10
M14X1.5
M10
M10
M10X1.25
M12×1.5
M18×1.5
M16X1.5
M14
M14×1.5
M16
M12
M12
M14X1.5
M10
M14
M14
82
Tightening Tightening
Torque [N·m] Torque [LB FT]
41~51 30~37
123~154 90~113
41~51 30~37
50~70 36~51
45~55 33~40
73~89 53~65
397~457 293~337
122~149 90~110
122~149 90~110
178~218 131~160
182~222 134~164
73~89 53~65
73~89 53~65
126~154 93~114
41~51 30~37
122~149 90~110
122~149 90~110