Safety Warning Symbols - Nortrac 35XT Owner's Manual

the tractor.
5. Antifreeze should always be used in the engine cooling system.
6. The front driving axle of tractor should only be engaged in agricultural instances and when roads are
muddy. Overuse of the front drive axle may result in premature wear of the tires and transmission
problems.
7. Only use parts recommended by the manufacturer to replace worn or broken components.
8.
Never rest your foot on the brake or clutch pedal when the tractor is in motion as this can cause premature
wear of the brakes and clutch system.
9.
When detaching the tractor from any implements, the upper lever of the suspension unit should be
adjusted to the shortest travel and the limit lever adjusted to prevent the implements from swinging
out of control. The locking nuts on the upper and limit levers must be tightened in order to guarantee
travel safety and to avoid damage to the tractor and the machinery.

1.2 Safety Warning Symbols

WARNING:
1. All safety identifiers should be visible and easy to read. When dirty, wash with soapy water and wipe
them with a soft rag.
2. When the safety identifiers are lost or damaged, contact the dealer or the manufacturer for
replacement stickers.
3. When replacing parts with attached Safety warning symbols, the safety identifiers that correspond to
that specific part need to be updated as well.
4. To prevent injury, accidents and damage, always comply with safety warning identifiers.
Fig. 1-10 Safety warning identifier
Safety Precautions
During machine operation, keep a safe distance from the hot surfaces of the
machine, as they can cause serious burns.
Location: outer side of damper, water tank flank.
6