Ignition Switch - Nortrac 35XT Owner's Manual

Horn

Ignition Switch

Insert the key into the electric switch and turn it clockwise to the following positions:
• Turn the key clockwise to ACC to turn on the auxiliary electrical devices.
• Turn the key to ON and the control circuit will be activated.
• Turn the key to H and the engine preheater will be turned on.
• Once preheated, turn the key to ST to start the engine. After the engine is
started release the key immediately, so that the key returns to the "ON"
position automatically.
To avoid burning out the starter, avoid turning the key to ST for more than 5
seconds.
Operation Description
The horn is in the center of the steering wheel. Press down the horn button
shown in the figure, and the horn will sound.
Figure 2-15 Horn
20
Figure 2-16 Ignition Switch Positions