Lifter Assembly Maintenance; Fuel Tank Maintenance; Tire Inflation - Nortrac 35XT Owner's Manual

Table of Contents

Advertisement

4.17 Lifter Maintenance
Unscrew the oil dipstick (A) on the hydraulic
auxiliary tank located above the lifter (as
shown in Figure 4-19). If the oil level does
not reach the lower scale mark, oil should be
added.
To replace the lubricating oil, unscrew the
oil drain plug (C) located under the lifter.
Drain out the dirty oil into a drip pan. Then,
reinstall the plug, and add new oil through
the refill opening (B).
NOTE:
Park the tractor on level ground, lower the lift arm to the lowest position and shut down the engine
before checking the oil level.

4.18 Fuel Tank Maintenance

Park the tractor on level ground, shut down the engine and remove the fuel drain plug located under the fuel
tank to drain out the deposits from the bottom of the fuel tank. Use a drip pan and dispose of the used fuel
properly. Reinstall the fuel drain plug and fill the fuel tank with fresh diesel fuel.

4.19 Tire Inflation

Use a pressure gauge to measure the pressure in the tires. For details about the inflation pressure of the tires,
refer to the List of Technical Specifications for 35XT Series Tractors.
NOTE:
Excessively low or high tire pressure will shorten the service life of the tires. It will affect
steering and control of the tractor, and could lead to hazardous situations.
Maintenance Instructions
A
68
C
Figure 4-19 Lifter Maintenance
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents