Timer Functions - Loewe TV set Operating Instructions Manual

Timer functions

Time:
i
On i
Setting timer functions:
Call the menu
MEN
Select „Timer functions"
Station
Video
Timer functions Switch off at
Child lock Alarm at
TV setup Alarm volume
GB F I E NL DK S
Date
Information
Time
Entry
O-9
X On/Off
X
TV Menu off
Entering date - time:
Select "Date":
0 9
... Day,Month,Year
Select "Time"
Enter time
Enter switch off time:
Select "Switch off time"
Enter time
Alarm time - Volume:
or Select "Alarm at"
Enter alarm time
80
Display - clear time display
Time on: Press the
Off
If the time is not correct, set the time as described below.
Timer functions
If you want to be reminded of an appointment at a certain time or you want the set to
switch itself off at a certain time, you can set this function in the „Timer functions" menu.
1. Call the menu with the
2. Select the „Timer functions" line with
the blue button
3. Set the date and the time:
If the set has been switched on with the on/
off button, the time display begins at zero
––:––
hours. The time and date will be set
––:––
O
automatically if you are reciving a station
––.––.––
with TOP teletext such as ARD, ZDF or one
OO:O1
of their regional programs. If you are only
receiving stations without teletext, you will
have to set the time and the date yourself.
Enter the date: Select „Date" with the
yellow button
month and year in two digits with the
number buttons.
Enter time: Select „Time" with the yellow
button and enter the hours and
minutes with the number buttons.
Senseless entries are not accepted.
Switch off at: The set switches to standby
and the red lamp lights up on reaching the
set time. Enter the switch off time, select
the „Switch off at" line, enter the hours
and minutes with the number buttons.
Alarm time - volume
If these functions are activated, the time
appears on the screen and a continuous
alarm tone is emitted at the set time if the
set is switched on.
Display - clear time display. Time on: Press the
i
button.
MEN
To ensure that the time and date can be
.
read clearly, we recommend that you store
the local main station with teletext at
program slot 1, 2 or 3.
system it may be that only the date or the
time can be seen. In this case, enter the
time or date yourself. Your entries always
have priority, i.e. the date and time will not
change even if you then switch to a station
with teletext and a different time zone.
foreign stations, especially when video
and enter the day,
recording with the timer!
The programmed functions „Switch off at",
„Alarm at" and „Alarm signal tone" are
repeated daily. The functions can, however,
be deactivated without erasing the
programmed times.
Select the „Switch off at" or „Alarm at" line,
deactivate the function by pressing
this is displayed by - - : - -.
the appropriate function and call with
button again.
i
In stations with a simple teletext
Take the time zone into account for
Switch the function back on: Select
,
X
.
X