Operating For The First Time - Loewe TV set Operating Instructions Manual

Operating for the first time – switching on/setting the dialog language
Switching on the TV set:
Press the on/off button
Sprache D
Language GB
Langue F
Lingua I
Idioma E
Taal NL
Sprog DK
Språk S
X Continue
X
TV Menu off
Choose language
X
Continue
Please note!
This chapter deals only with the operating procedures necessary for first time operation.
If your dealer has already taken care of searching and storing the TV stations
for you, the menu described below no longer appears!
If you want to search for and store TV stations, e.g. if you move house, consult the
chapter "Automatic programming" which begins on page 58.

Operating for the first time

We want to make the station search and storing as easy as possible for you. A language
list appears automatically the first time you switch on the set. From this you can
1. choose the „Language" for further operation of the set
2. select the transmission range for TV stations, e.g. Antenna/cable = VHF/UHF and
cable channels or a satellite range providing your set is fitted with a satellite receiver
3. choose the country from which you want to receive TV stations.
Switching on the TV set
Press the on/off button on the TV set,
marked , gently as far as it will go. The
green On lamp lights up on the local control
panel.
Choosing the language
You have two choices:
1. You can accept the „Language"
marked in blue, press the
„Continue".
2. Choose another „Language" with the
blue buttons in the remote
control.
3. Then press the button.
X
Note
The on/off switch for Modus and Planus is
located behind the flap of the local control
panel.
button to
X
57