Listening With Headphones - Loewe TV set Operating Instructions Manual

Daily operation of the set – switching off sound/headphones
Switching off the loudspeaker sound:
Mute
Switching sound back on:
or
Adjusting the headphones volume:
Mute
– + Adjust volume
Selecting Sound 1 or Sound 2 for the
headphones:
Mute
Select language
Sound 2
HP vol
Switching the loudspeaker sound back
on:
76
Switching sound off, on
The loudspeaker sound is switched off and
<Mute> displayed in red for a few seconds
on pressing the Mute button
button again to switch the sound back
on.
The sound can also be switched back on
with the Picture/sound normal button
.

Listening with headphones

The headphones jack is designed for 6.3 mm stereo jack plugs and is on the set's local
control panel. Use headphones with an impedance of 32 ohms or higher. You can adjust
the headphones volume independently of the loudspeaker volume.
Adjusting the volume
First switch off the loudspeaker sound by
pressing the Mute button
Display: <Mute>
Then set the volume with the volume
buttons
–
Selecting Sound 1 or Sound 2
The sound channel can be selected
separately for headphones and
loudspeakers for 2 Sound broadcasts.
Select the sound channel for the
– +
headphones:
1. Press the Mute button
2. Press the Sound functions button
until Sound 1 or Sound 2 is marked
white.
3. Switch over the sound channel with the
3O
or
+
4. Press the Mute button
loudspeaker sound is switched back on.
. Press the
.
.
+
.
button.
–
again., the
Depending on the selection, it is now
possible for different sounds to be listened
to on headphones and loudspeakers, e.g.
the main sound 1 on the loudspeakers and
the foreign language sound 2 on the
headphones.