Videorecorders/Camcorders/Decoders - Loewe TV set Operating Instructions Manual

Connecting other equipment – videorecorders/camcorders
1
2
R L
ARIAL
RF–OUT
1
2
R L
ARIAL
RF–OUT
Select program slot 00 for AV
playback through the antenna socket:
0
0
90
Connecting video recorders or camcorders
You can connect any VCR to your TV. Loewe VCRs, however, are specially adapted to
these TVs. This has the advantage that you can control the important functions of the VCR
with the TV remote control. You can record both terrestrial and satellite programs
(providing a satellite tuner is fitted) with the „VCR programming" function.
There are several ways of connecting your video recorder to the TV set:
1. An antenna - video recorder - TV connection, this allows you to tape a TV program with
the video recorder and watch another program on the TV at the same time. The
disadvantages of this type of connection are:
• Poorer picture and sound quality in reproduction.
• Reproduction in stereo sound not possible.
• You cannot use the TV timer functions.
2. A connection by means of an AV cable from the video recorder to one of the EURO-AV
sockets on the TV set. The advantages of this type of connection are:
• Better picture and sound quality.
• Stereo sound reproduction is possible.
• You can select Sound 1 or Sound 2 when playing back a 2 Sound recording.
• A concealed Loewe video recorder can be operated with the TV remote control.
• The possibility of recording programmes with the videorecorder with the timer and
the TV set receiver units.
• The possibility of recording programs with the video recorder with the timer and the
receiving points of the TV.
We recommend both types of connection, in this way you can use all the functions of
your video recorder and TV set without restrictions.
3. You can connect camcorders for playback or copying either to the front socket
„S-TERMINAL"/"AVS" (for S-VHS, Hi8) or to the cinch socket „Video in" (for VHS, 8 mm
video). Only connect one camcorder, never two at once! Feed the sound into the two
cinch sockets „L AUDIO R". Use one of the EURO-AV sockets for Profil 2570Z.
Video playback through the antenna socket
Program slot 00 is preprogrammed specially (short time constant) for good reception of
the video recorder channel (CH 36). Select this program slot on the TV set. Most video
recorders are set to channel 36 or 37. You can check this by switching on the video
recorder's „test signal" or switching the video recorder to play. If you do not get perfect
picture and sound reproduction or no reproduction at all, you can set the video recorder's
transmitter to another channel. Channels 30 to 39 are normally used. There is an adjustor
„RF CHANNEL ADJ" on the back of the video recorder. Set the video recorder's
transmitter so that the picture and sound are reproduced perfectly. Of course you can
also use the „Station search and store" menu to find and fine tune the video recorder
transmitter.