Loewe TV set Operating Instructions Manual page 45

Connecting other equipment - Timer recording
VCR programming
Program Start Stop
1 ARD 2O:15 21:45 28.O8 on 1
--- --:-- --:-- --.--
--- --:-- --:-- --.--
+ Position
- On/Off
+ M
X Store
– X
O-9 Entry
Store timer data
X
Selecting the VCR programming:
Select „Video"
MEN
Select „VCR programming"
Select timer
MEN
VCR programming
Program Start Stop
1 ARD 2O:15 21:45
3 BR 3 21:15 22:OO 29.O8 on 2
--- --:-- --:-- --.--
+
Select input position
Enter data with the number buttons
VPS or AV with button
– select
store
X
4. The VCR programming is not stored as
long as data are flashing!
If you have connected two video
Date VPS AV
recorders to the EURO-AV sockets, you
can set AV 1 for one timer and AV 2 for
--- -
the next timer. In this way you can
--- -
decide which recorder is to record.
5. Store the timer data by pressing the
button and select the next timer
X
line with the blue buttons
fade out the timer with the
Timer data - change, enter manually
or delete
When you press the
program name and program number start
flashing. If you press this button several
times you come to start and stop time,
date, VPS or AV connection. You can set
each position as it flashes. Enter the date,
time or program number with the number
buttons.
Date VPS AV
Set VPS to „VPS on" or „VPS off" with the
28.O8 on 1
button. When you have entered all the
–
desired data, store these by pressing the
--- -
button. Select the next timer with the
X
blue button
data etc.
Entering timer data manually:
Select the blank timer with the blue arrow
buttons. The „Program no." position
flashes, enter the appropriate program
number. When you have entered all the
data, store them by pressing the
button. Shift the position for input or
correction within a timer line with
the button.
+
or
button.
TV
button, the
+
and enter the recording
X
Attention!
If timer recordings are programmed, the TV
set may on no account be switched off at
the on/off button, otherwise the timer data
will be lost. If you switch your TV set to
standby with the remote control. This is
signalled by the red and green lamps on
the TV set's local operating panel for VPS
search (approx. 1 hour before recording)
and during recording.
Note: On „VPS On", your video recorder
will be controlled by the VPS times
transmitted by the station. If you set „VPS
Off", the video recorder will record with the
data set in your VCR programming.
Make sure you have set the correct date
and time on your TV set! You can get the
VPS times from the program preview by
pressing the button.
?
Broadcasts with VPS may start earlier or
later, the TV set therefore searches for the
VPS information before the start time. If you
are watching a TV program, the TV set
switches over to the program to be
recorded about 10 minutes before
recording is due to begin. The message
„Video recording" is displayed. It is now
no longer possible to switch over to
another program unless your TV is fitted
with a satellite tuner. For example you can
watch a terrestrial program while recording
a satellite program.
Programming for recording series:
Enter the program number, start and stop
time as usual. Enter the day of the week (1
= Monday - 7 = Sunday) instead of the date
and always 00 for the month.
Examples:
Daily series = 17.00,
sundays only = 77.00
saturdays and sundays only = 67.00,
daily monday to friday = 15.00.
95