Timer - Loewe bild 9 Operating Manual

Loewe bild 9
Operating manual
Recordings

Timer

Timer
In the timer menu you will find the Timer List and the Timer Services.
All programmed recordings, earmarked programmes and copy jobs
are listed in the timer list.
The timer services menu offers you convenient alarm services.
Calling the timer menu
HOME: Calling the Home view.
Select Recordings,
select Timer,
OK call.
Or:
press longer: call the timer menu.
Select Timer list or Timer Services (see
right column).
Select Manual recording,
OK Timer data is called.
When you have programmed timer recordings, the
TV set can only be switched off to the standby mode.
Never switch the TV set off at the mains and do
not pull out the plug of the TV set out of the socket.
Otherwise no timer recordings can be made.
When a software update occurs it may happen
that timer entries and memorised programmes
are deleted. After such a software update, check
your timer list.
Explanation of the symbols in the timer list:
Recording
Recording in progress
Memorised programme
Repeated recording (daily, weekly or Mon-Fri)
Series recording
28
Delete / change programmed timer instruction
Use this function in the timer list if you want to delete recordings
already programmed, end a running timer recording or change a
timer instruction.
The timer menu is displayed.
Mark desired timer instruction.
The text of a currently active timer instruction is red.
If you delete this timer instruction, the recording is
stopped.
OK Change marked timer instruction.
The timer data is displayed.
Or:
STOP: Delete marked timer instruction.
OK Confirm delete.
Timer Instruction is deleted.
Timer Services
Programmed alarms are also active when the TV set has been switched
off to standby.
If the TV set is switched on from the standby mode by alarm, a screen
message appears. If this is not confirmed within 5 minutes with the
OK key, the TV set switches automatically off again for safety reasons.
The TV set can also be switched off automatically at certain times.
A screen warning appears one minute before automatic switch off.
The automatic switch off can be interrupted by pressing any key.
The timer menu is displayed.
Mark Timer Services.
Select the desired setting,
OK change.
OK adopt.