Connecting Other Equipment; Loudspeakers/Hifi System - Loewe TV set Operating Instructions Manual

Connecting other equipment – loudspeakers/HiFi system
Sound selection for the cinch sockets:
Select „TV setup"
MEN
Select „Special functions"
Station
Video
Timer functions
Child lock
Normal settings
TV setup
Factory setup
GB F I E NL DK S
On-screen display
Information
Teletext
Special functions
MEN
Special functions
Volume corr.
Colour corr.
Signal Cinch variable
VTR Stereo
AV Sound Sound1
Select the „Signal Cinch" line
Select sound signal fixed or variable
X
TV
End setup
Adjusting the volume of the HiFi
amplifier:
Press, display: <Mute>
Select <HP vol>
– + Adjust volume
Stereo - Mono! or Sound 1 - Sound 2:
Select line <Stereo> or <Sound 1>
– +
Set <Mono!> or <Sound 2>
Connecting the loudspeakers
The sockets for the loudspeakers are on the back of the set; L = left sound channel,
R = right sound channel. Connecting values of the loudspeakers: 4 ohms/40 watts.
The TV's speakers are cut off when other loudspeakers are connected.
Connecting a HiFi amplifier system
The sockets (Cinch) for a HiFi amplifier system are on the back of the TV set.
Red socket = right sound channel, white socket = left sound channel. If you connect an
amplifier system, you can play the TV sound through the stereo amplifier system.
You can select the following functions for the cinch sockets:
1. Fixed sound signal: all sound functions are adjusted on your HiFi amplifier system.
2. Variable sound signal: you can adjust the volume of the HiFi system with your TV
remote control. Set a basic volume of the HiFi system first.
Selecting the signal to the cinch sockets:
1. Call the menu, press the
2. Select the „TV setup" line with the blue
O
button
O
3. Select the „Special functions" line with
the yellow button
4. Press the
5. Select the „Signal Cinch" line.
6. Set „fixed" or „variable" with the
button.
7. End setup by pressing the
Adjusting the volume of the HiFi amplifier system
If you have selected „Signal Cinch variable", you can adjust the volume of your HiFi
system with your TV remote control.
1. Press the Mute button
<Mute> is displayed briefly on the
screen in red, the sound of the TV set's
loudspeakers is switched off.
2. Press the Sound functions button
3. If <HP vol> is marked in white, you can
adjust the volume of the HiFi system with
the
–
button.
MEN
.
.
button.
MEN
X
button.
TV
.
buttons.
+
If you select „fixed", there is a fixed signal
level at the cinch sockets.
If you select „variable" you can set the
sound signal at the cinch sockets by
adjusting the headphones volume.
If you had set to „fixed", adjust the volume
only on the HiFi system.
For stereo broadcasts, you can select the
.
<Stereo> line with the
<Mono!> with the
–
In 2 Sound broadcasts, you can switch
from <Sound 1> to <Sound 2> and vice
versa.
button and
buttons.
+
89