Table of Contents
Advertisement
Daily operation of the set – adjusting the sound/mono/stereo/balance, 2 sound
Selecting stereo wide or depth of
sound for mono:
Select < > Off line
–
+
Switch to < > On
<
Treble
Bass
Balance
Stereo
Music
Volume
Switching from stereo to mono:
Select „Stereo" line
Switch to „Mono!"
–
+
Balance
Mono!
Music
Volume
Adjusting the balance
Select "Balance" line
–
Adjust balance
Two sound broadcast, Sound 1 or
Sound 2
Select language
<
Treble
Bass
Balance
Sound 2
Music
Volume
Wide or depth of sound < >
The function < > (wide/depth of sound) can
be switched on or off.
Switch wide/depth of sound:
Press the Sound functions button
several times to mark „< > Off". You can
switch to „< > On" with the
buttons as long as this is displayed on the
>
on
screen.
6
-3
O
Switching from stereo to mono
The set switches automatically to stereo
23
when it receives a station with stereo
sound. However, if you still want to listen to
the sound in mono: Press the Sound
functions button
marked. You can switch to <Mono!> with
the
–
+
In stereo reception, the „Wide on" gives the
impression that the loudspeakers are
O
farther apart. The considerably increases
the stereo effect. In mono reception the
depth of sound is improved.
23
Adjusting the balance
Press the Sound functions button
several times until <Balance> is
marked. Adjust the volume of the right-hand
+
or left-hand loudspeaker with the
or
+
optimum stereo reproduction.
Two sound broadcast
–
+
If you switch to a program with two-sound
transmission, <2 Sound> is displayed in
addition to the program name. You can
>
off
choose between the main language Sound
6
-3
1 and the foreign language Sound 2.
O
Select <Sound 1> by pressing the Sound
functions button
over to <Sound 2> with the
23
buttons.
–
–
+
until <Stereo> is
buttons.
buttons to achieve
–
several times, switch
or
+
„Nicam" sound norm
The TV set must be equipped with a Nicam
decoder in order to receive the Nicam
sound norm.
Stations with the „Nicam" sound norm can
be received in Belgium, England, Spain,
Sweden and France. The set switches
automatically to the Nicam norm for Nicam
sound broadcasts.
If the station broadcasts stereo sound, the
display <Stereo> appears, <Nicam>
appears for a mono broadcast.
If you want to listen to a stereo broadcast
in mono, e.g. because there is some
interference, switch the sound function
from <Stereo> to <Mono!>.
1. Press the Sound functions button
until <Stereo> is marked in white.
2. Press the buttons
–
briefly, display <Mono!>. This adjust-
ment is retained until you switch back
over to <Stereo>.
If you want to know whether the station is
broadcasting in Stereo, Mono or 2 Sound,
press the
button briefly. Stereo, Nicam
TV
or 2 Sound appears on the screen next to
the program name. For 2 Sound broad-
casts you can mark the <Sound1> or
<Sound2> line by pressing the
and select the desired sound with the
or
buttons. The displayed
–
+
sound functions disappear again
automatically after a few seconds or press
the
button again.
TV
or
+
button
75
Hide quick links:
Advertisement
Table of Contents
