Automatic Connection; Bluetooth; Automatic Call Acceptance; Telephone Volume - Becker GPS Navigator Operating Manual

>>> TELEPHONE MODE
Bluetooth®
With the

Bluetooth

switch Bluetooth® on or off.

Automatic connection

With the Auto-connect
switch on or off whether an automatic
connection to a cell phone is attempted
after switching on the Navigation device.
> In the settings menu, press the
connect
button.
Depending on the previous setting, you
can switch the function on or off.
• Top icon: function on
• Bottom icon: function off
118

Automatic call acceptance

® button, you can With this function, you can set whether
or not or after which time an incoming
call is accepted automatically.
button, you can
> In the settings menu, press the
Answer call automatically
Auto-
> Select whether incoming calls will be
accepted automatically after 3, 5 or
10 seconds.
If you select
off.
button.
Off
, the function is switched

Telephone volume

With this function, you can set the
volume of the ringtone and the volume
of the call.
> In the settings menu, press the
Volume button.
> Select the desired volume with the
and buttons.
Mute
> Press the button to mute the
volume. By pressing the
again, the telephone volume is
switched back on.
> Confirm your settings by pressing the
back button .
button