Selecting Info Box Data Fields - Becker GPS Navigator Operating Manual

>>> NAVIGATION MODE
Select POI categories
You can select which POI symbols are to
be displayed on the map.
Select POI categories
> Press the
in the extended settings.
Selecting Show all POIs
points of interest on the map.
Show no POIs
Selecting
points of interest on the map.
User defined selection
Selecting
then pressing the
allows you to determine for yourself in
the menu which then appears whether
each individual points of interest
category is displayed or not.
64
button
> You can then switch the display of
entire categories on (
After pressing the
category you can switch subcategories in
further menus on or off.
displays all > Confirm all your settings by pressing
the
displays no

Selecting Info box data fields

and In this menu you can define the data to be
Select POIs
button displayed in the Info box in the top left
corner of the map view.
> Press the Info box data fields button.
The Info box data field selection window
appears.
) or off ( ).
button beside a
button.
Touch the first field to select one of the
possible options.
An options list appears on the right side
over the window.
After selecting a route (cell with route),
the following display options are availa-
ble: Distance, Remaining time, Arrival
time, Speed, Speed limit, Time and
Height.