Connecting The Power Supply - Avery Dennison Monarch 9416 XL Equipment Manual

U n p a c k i n g t h e P r i n t e r
After you unpack the printer, you should have
♦ 9416 printer
♦ power supply/power cord
♦ ribbon reel
♦ take-up core (already on the take-up reel)
♦
Quick Reference
♦
CD-ROM that contains software and manuals (included with applicable models).
If any items are missing, contact Monarch for replacement parts.
Note: Keep all packaging material in case you need to move or return the printer.
C o n n e c t i n g t h e P o w e r S u p p l y
CAUTION: Do Not touch the electrical connectors while setting up the printer.
Electrostatic discharge can damage or destroy the printhead or electronic
components.
To connect the power supply:
1. Place the printer in a location that allows easy access to the front of the printer.
Note: The printer should never be operated while resting on its side or upside down.
2. Place the power supply in a suitable location, preferably on the floor, near an
electrical outlet.
3. Turn off the printer. Press the switch on the back of the printer to the OFF
position (O).
Plug the three-hole end of the AC adapter cable into the three-pronged outlet in
4.
the power supply.
Plug the round end of the power supply cable (labeled "printer") into the socket at
5.
the back of the printer.
6. Plug the three-pronged end of the AC adapter cable into a grounded electrical
outlet.
WARNING: The printer and power supply should never be operated in a location
where either one can get wet. Personal injury could result.
1-2 Equipment Manual