Fireplace Requirements; Fireplace Altered Tag - Travis Industries Large Flush Owner's Manual

8 Fireplace Insert Installation

Fireplace Requirements

Figure 2 shows the minimum size requirements for the type of fireplace used.
j
i
a
g

Fireplace Altered Tag

Attach the "This fireplace has been altered..." plate to the fireplace (use two screws or other suitable
method). You may wish to place it in a location where it will be covered by the surround panels.
© Travis Industries
h
b
d
c
e
f
Figure 2
(for qualified installers only)
Minimum Fireplace Size
a Height (front)
b Height (rear)
c Width (front)
d Width (rear)
e Depth
f Hearth Depth
NOTE: Base of insert must be a
minimum 1" above combustible floor
surfaces (carpet, wood, etc.). See
"Hearth Requirements" for further
details.
g Hearth Width
h Facing Width
i Facing Height Above Base of Insert
j Mantel Height Above Base of Insert
* Includes 2" (51mm) for power cord installation.
100-01291
23.5" 597mm
22" 559mm
33"* 839mm*
20.75" 528mm
19" 483mm
See "Hearth
Requirements"
See "Hearth
Requirements"
41.25" 1045mm
47.75" 1210mm
51.25" 1300mm
4060512