Tm Igniter - Firebrick And Housing Installation; Greenstart - Travis Industries Large Flush Owner's Manual

32
TM

GreenStart

Igniter – Firebrick and Housing Installation
This insert is compatible with the GreenStart
uses a specialized firebrick and housing that are shipped with the insert. If you are using the igniter, install
these components as shown below. The igniter is installed as shown in the instructions included with the
igniter kit.
HINT: If you are not using the igniter, store these components inside the fireplace cavity in case the
homeowner later decides to install them.
1. Remove the two firebricks from the front left corner of the firebox.
2. Place the igniter firebrick as shown below.
© Travis Industries
Optional Equipment
TM
automatic wood-stove igniter. This optional component
Igniter Firebrick
100-01291
Igniter Housing
4060512