Typical Setup Procedure; Step 1: Network Setup; Step 2: Create Local Users; Step 3: Create Folders And Set Up Acls - Thecus N1200 User Manual

Typical Setup Procedure

From the Web Administration Interface, you can begin to setup your N1200 for
use on your network. Setting up the N1200 typically follows the four steps
outlined below.

Step 1: Network Setup

From the Web Administration Interface, you can configure the network settings of
the N1200 for your network. You can access the Network menu from the menu
bar.
For details on how to configure your network settings, refer to Chapter 3:
System Management > Network Management.

Step 2: Create Local Users

Once the network is setup correctly, you can begin to create local users for the
N1200.
For more on managing users, go to Chapter 3: System Management > User
and Group Management.

Step 3: Create Folders and Set Up ACLs

Once users are introduced into your network, you can begin to create various
folders on the N1200 and control user access to each using Folder Access Control
Lists.
More information on managing folders, see Chapter 4: System Management >
Storage Management > Folder Management.
To find out about configuring Folder Access Control Lists, see Chapter 4: System
Management > Storage Management > Folder Management > Folder
Access Control List (ACL).

Step 4: Start Services

Finally, you can start to setup the different services of the N1200 for the users on
your network. You can find out more about each of these services by clicking
below:
Windows Networking (SMB/CIFS)
Apple File Protocol (AFP)
FTP Server
iTunes® Server
Media Server
Download Manager
Printer Server
Photo Gallery
15