Upgrading System Firmware; Change Administrator Password - Thecus N1200 User Manual

Upgrading System Firmware

From the System menu,
choose the Firmware
Upgrade item and the
Firmware Upgrade screen
appears.
Follow the steps below to
upgrade your firmware:
1. Use the Browse
button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and
the Busy LED blinks
until the upgrade is
complete.
NOTE

Change Administrator Password

From the System menu,
choose the Administrator
Password item and the
Change Administrator
Password screen appears.
Enter a new password in the
New Password box and
confirm your new password in
the Confirm Password box.
Press Apply to confirm
password changes. See the
following table for a detailed
description of each item.
Change Administrator Password
Item
New Password
Confirm Password
Apply
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
Description
Type in a new administrator password.
Type the new password again to confirm.
Press this to save your changes.
38