Thecus N1200 User Manual page 13

10. Select the N1200 that you like to configure. Click Next.
11. Login with the administrator account and password. The default account
and password are both "admin".
12. If this is your first time setting up the N1200, select Initialize new
system and click Next to continue. A prompt will appear confirming that
hard disk data will be erased. Click OK to continue with the installation, or
Cancel to go back.
WARNING
If you are configuring a previous installation, select Configure system.
Click Next.
13. Name your N1200 and configure the network IP address. If your router is
configured as a DHCP Server, configuring the N1200 to automatically
obtain an IP address is recommended. You may also use a static IP
address and enter the DNS Server address manually. Click Next.
NOTE
Choosing Initialize new system will destroy all data contained on the hard disks.
This data will not be recoverable.
Make sure that your N1200 is on the same IP segment as your PC i.e.
192.168.0.XXX. If you choose to use a static IP address for the N1200 and it is not
configured for your PC's IP segment, the installation will encounter an error.
13