Mac Os - Thecus N1200 User Manual

14. Change the default administrator password if desired. Click Apply.
15. Finished! Access the N1200 Web Administrator Interface by pressing the
Start Browser button. You can also configure another N1200 at this point
by clicking Setup Other Device.

Mac OS

1. Insert the installation CD into your CD-ROM drive (the host computer must
be connected to the network).
2. Browse your CD-ROM drive and navigate to the Setup Wizard > Mac
folder. Double click on the .dmg file inside this folder.
3. A window will appear. Double click on the Thecus Setup Wizard icon.
4. The Setup Wizard will start and automatically detect all N1200s on your
network. If none are found, please check your connection and refer to
Chapter 7: Troubleshooting Guide
5. Select the N1200 that you like to configure. Click Next.
6. Login with the administrator account and password. The default account
and password are both "admin".
7. If this is your first time setting up the N1200, select Initialize new
system and click Next to continue. A prompt will appear confirming that
hard disk data will be erased. Click OK to continue with the installation, or
Cancel to go back.
WARNING
If you are instead configuring a previous installation, select Configure
system. Click Next.
8. Name your N1200 and configure the network IP address. If your router is
configured as a DHCP Server, configuring the N1200 to automatically
obtain an IP address is recommended. You may also use a static IP
address and enter the DNS Server address manually. Click Next.
NOTE
9. Change the default administrator password if desired. Click Apply.
10. Finished! Access the N1200 Web Administrator Interface by pressing the
Start Browser button. You can also configure another N1200 at this point
by clicking Setup Other Device.
NOTE
Choosing Initialize new system will destroy all data contained on the hard disks.
This data will not be recoverable.
Make sure that your N1200 is on the same IP segment as your computer i.e.
192.168.0.XXX. If you choose to use a static IP address for the N1200 and it is not
configured for your computer's IP segment, the installation will encounter an error.
The N1200 is designed for installation on systems running Windows XP/2000 or Mac
OSX or later. Users with older operating systems will need to install the N1200 on a
host machine with a newer OS before using the N1200.
14
for assistance.