Loading Supplies; Loading For Non-Peel Mode - Avery Dennison Monarch Sierra Sport2 Operator's Handbook Manual

L O A D I N G S U P P L I E S
This chapter describes how to load supply for
♦ non-peel mode (prints on continuous strip of
supply).
♦ peel mode (prints and separates the label from the
liner).
Loading tips:
♦ Whenever you open and close the supply door,
press F to calibrate the supply under the
printhead.
♦ The printer may be on or off when loading
supplies.

Loading for Non-Peel Mode

Use these instructions to load labels, tags, receipt
paper, and linerless labels (supply without a liner). To
print linerless labels, the printer needs to be setup
with the linerless platen roller.
1. Open the supply door by pushing down on the
release buttons on both sides of the printer. The
supply door should swing open.
Release
Button

Loading Supplies 2-1

2