Label Length Format; Variable Length Format - Intermec SR60 Programmer's Reference Manual

Calculate
Don't Transmit
Transmit
END ------------------------------------------
SR60 Scanner Programmer's Reference Manual
Chapter 4 — Enabling and Configuring Symbologies
---------
---------
---------

Label Length Format

The next two sections explain how to set the Interleaved 2 of 5
Label Length Format to either the Variable Length or Fixed
Length Format.

Variable Length Format

You can set the Interleaved 2 of 5 symbology to Variable Length
Format.
To set the Interleaved 2 of 5 Variable Length Format
1 Identify the minimum length setting you want to make. You
may choose any even number between 02 to 50 characters.
Note: For this symbology, the scanner decodes up to 50
characters, but the actual length read varies depending upon
the interface type, bar code physical size, and print quality.
2 Scan the SET bar code on page 86.
3 Scan the Enable Variable Length Format bar code.
85