Rs-232 Interface/Wn-Rs-232 (Sni) Interface; Rs-232 Communication Parameters - Intermec SR60 Programmer's Reference Manual

RS-232 Interface/WN-RS-232 (SNI) Interface

SET -------------------------------------------
Enable Standard
RS-232
Enable WN-RS-232
END ------------------------------------------

RS-232 Communication Parameters

SR60 Scanner Programmer's Reference Manual
Scan the following bar codes to enable either the standard
RS-232 interface or the WN-RS-232 (SNI) Interface.
---------
---------
This section describes these RS-232 communication parameters:
• Baud Rate
• Data Format Settings: Data Bit, Parity Bit, and Stop Bit(s)
• Handshaking
• Hardware Handshaking (CTS/RTS)
• Software Handshaking (XON/XOFF)
• ACK/NAK Options
• Intercharacter Delay
Chapter 2 — Configuring Interface Settings
19