4-6.11 Set Supervisor / User Password - SOLTEK SL-85DRS User Manual

85DRS

4-6.11 Set Supervisor / User Password

These two options allow you to set your system passwords. Normally,
the Supervisor Password should be set up first before you could go to
set up the User Password. :
1. Choose "Set Supervisor Password" in the Main Menu and press
<Enter>. Then the following message appears:
[ Enter new supervisor password ]
2. The first time you run this option, enter your password up to 8 char-
acters and press <Enter>. (The screen does not display the entered
characters.)
3. After you enter the password, the following message appears prompt-
ing you to confirm the password:
[ Retype new supervisor Password ]
4. Enter the same password "exactly" the same as you have just typed
to confirm the password and press <Enter>.
5. The following message appears to confirm the new password setup.
[ New supervisor password installed ]
6. Then choose "Advanced BIOS Features" of the main menu, and roll
your cursor to the item "Password Check", so that you can set the
new password to Always (System) or Setup (BIOS) only.
7. After you have made your choise for the new password, you can now
set up the User Password from the Main Menu. Choose "Set User
Password" in the Main Menu and press <Enter>.
8. When the following message appears, enter your new user pass-
word in the dialog box and then press <Enter>:
9. After pressing <Enter>, the following message appears to prompt
you to confirm the new password and press <Enter>:
[ Enter new user password ]
[ Retype new user password ]
70