SOLTEK SL-85DRS User Manual page 71

10. After pressing <Enter>, the following message appears to confirm
the new user password.
[ New user password installed ]
11. Move the cursor to Save & Exit Setup to save the password.
12. If you need to delete the password entered before, choose the Su-
pervisor Password and press <Enter>. It will delete the password
that you have entered before.
13. Move the cursor to Save & Exit Setup to save the option you have
just configured; otherwise the old password will still be there the next
time you turn your system on.
14. Press <Enter> to exit to the Main Menu.
NOTE: If you forget or lose the password, the only way to access
the system is to clear the CMOS RAM. All setup informations
will be lost and you need to run the BIOS setup program again.
Chapter 4 BIOS Setup
71