Selecting Preset Stations - Integra DSR-7.3 Instruction Manual

Selecting Preset Stations

Before selecting preset stations, you need to preset the radio
stations. See "Presetting Radio Stations" on page 35.
1
Press Input Selector 2/3 on the
Remote
remote controller or Input 2/3 on
controller
the unit to switch the input source
to the FM or AM.
The band selected in this step will not
affect the next step.
Unit
Remote
2
Press Tuning/Preset 2/3 on the
controller
unit or Tun+/– on the remote
controller repeatedly to select the
preset number of the desired radio
Step/ Slow
station.
C H
Tun
Unit
Note
If you press Tuning/Preset 2/3 on the
unit for more than 1 second, the unit
enters the manual tuning mode. See step
2 in "Tuning Manually" on page 35.
Input 2/3
Preset Memory
Tuning/Preset 2/3
Before operating the
remote controller
Press Mode Recvr.
Erasing a Preset Station
1
Select the preset channel you wish
to erase (see steps in the left
column of this page).
2
Unit only
Press Preset Memory.
"ERASE" appears in the display.
3
While "ERASE" is flashed (for
about 8 seconds), press Preset
Memory again.
The selected preset channel will be
erased.
Various Functions While Listening to
Radio Programs
To use the following functions, see page 40.
• Adjusting the Volume
• Muting the Sound
• Listening Through Headphones
• Controlling the Brightness of the display on the DVD Receiver
Enjoying the Sound Effects While
Listening to Radio Programs
See page 46.
2/3
Input Selector
Tun +/–
Step/ Slow
C H ENTER VOL
Tun
T-D/ ST Muting
Surround A.Control
Repeat A- B
Late Night Timer
Audio Angle Subtitle FM Mode
Last M Program Random Clear
SP Setup Test Tone CH Sel
1 2 3
SW Mode Distance
4 5 6
IPM T- D Setup Up/ Down
7 8 9
+10 0 Search
-- / --- Enter
RC- 507 M
37