Integra DSR-7.3 Instruction Manual page 50

Enjoying the Sound Effects
Adjusting Each Speaker's Relative Volume Balance Temporarily
You can readjust each speaker's relative volume balance
according to your preference while listening to the sound.
The adjusted values will return to the values set on page 28
when the DVD Receiver enters standby mode, or the main
power is switched off unless you save the values.
Note
You cannot adjust the volume balance while the muting function is
activated.
1
(Checking each speaker's relative
volume balance)
Remote controller
While playing the source, press
only
CH Sel repeatedly.
CH Sel
Each press of the button changes the
3
speaker which outputs the sound and the
selected speaker appears in the display in
the following order:
LEFT (Front left ch.)
CENTER (Center ch.)
RIGHT (Front right ch.)
SURR R (Surround right ch.)
SURR L (Surround left ch.)
SUBWFR (Subwoofer)
Speaker volume adjustment mode off
Note
Any speaker that is not included in the speaker
configuration on page 26 is not selected even if
it is actually connected.
50
↓
↓
↓
↓
↓
↓
Before operating the
remote controller
Press Mode Recvr.
2
(Adjusting each speaker's relative
CH Sel
volume balance)
3
Press CH Sel repeatedly to select
the speaker, then press Up/Down
5/∞ to adjust the volume level.
The volume level can be adjusted
6
between –12dB and +12dB.
Up/ Down
9
Repeat this step to change another
speaker's volume balance.
Saving the adjusted values
Press Test Tone.
Remote controller
only
Test Tone
2
Step/ Slow
C H ENTER VOL
Tun
T-D/ ST Muting
Surround A.Control
Repeat A- B
Late Night Timer
Audio Angle Subtitle FM Mode
Last M Program Random Clear
Test Tone SP Setup Test Tone CH Sel CH Sel
1 2 3
SW Mode Distance
4 5 6
Up/Down
IPM T- D Setup Up/ Down
7 8 9
+10 0
Search
-- / --- Enter
RC- 507 M