Connecting To A Tv - Integra DSR-7.3 Instruction Manual

Integra dvd receiver instruction manual
Hide thumbs Also See for DSR-7.3:
Table of Contents

Advertisement

Connecting to a TV

Before connecting
• Refer also to the instruction manual of the TV.
• When you connect the DVD Receiver to the TV, be sure to turn
off the power and unplug both the units from the socket before
making any connections.
• Connect the DVD Receiver to the TV directly. If you connect the
DVD Receiver to a VCR, TV/VCR combination, or video selector,
the playback picture may be distorted as DVD videos are copy
protected.
I Connecting to a TV (or projector)
Using the supplied audio/video connection cable, make
audio connections from the TV/LINE IN L and R jacks to
the corresponding audio output jacks on the TV. In the
same manner, make video connections from the VIDEO
OUTPUT "VIDEO" jack to the corresponding video input
jack on the TV.
If your TV has a S video input jack and/or component video
input jacks, make S video connection to the S VIDEO jack
using supplied S video connection cable and/or make
component video connection to the COMPONENT jacks
using component video connection cable (not supplied).
These connections allow you to enjoy higher quality picture
playback. You can switch between [S1] and [S2] S-video
output from the Setup menu on page 69.
Use the DIGITAL
OPTICAL IN jack in
combination with the TV/
LINE IN jack. When you
use the Input selector to
select TV/LINE IN,
DIGITAL OPTICAL IN is
also activated. When both
a digital signal and an
analog signal are input,
the digital signal takes
precedence.
See "Turning the unit on/off with the TV's power switch — IPM function" on page 25 for Inteligent Power Management (IPM) function.
16
TV or projector
DIGITAL
OUT
AUDIO
VIDEO
S VIDEO
COMPONENT VIDEO IN
OPTICAL
OUT
IN
IN
Y
R
L
L
PREOUT
IR
AUDIO
REMOTE
IN
CONTROL
R
SUB
IN
OUT
IN
WOOFER
TV/LINE
MD/CDR/TAPE
DIGITAL
VIDEO OUTPUT
Y
P
B
OPTICAL
OUT
IN
S VIDEO
VIDEO
COMPONENT
• Connect the plugs securely.
• Note that one audio/video connection
cable and one S video connection cable
are supplied.
Notes
• Actual labels for component video inputs may vary depending
on the TV manufacturer (ex. Y/C
• In some TVs, the color levels of the playback picture may be
reduced slightly or the tint may change. In such a case, adjust
the TV for optimum performance.
Video
(Yellow)
L (White)
R (Red)
P
P
B
R
Y
P
B
P
R
SURROUND
ANTENNA
R
AM
FM 75
P
R
/C
, Y/B-Y/R-Y, etc.).
B
R
Audio/video connection cable
S video connection cable
Optical fiber cable
Component video
connection cable
Signal flow
FRONT SPEAKERS
SPEAKERS
AC INLET
L
R
CENTER
L
DO NOT connect the
power cord at this time.
Incomplete
Insert completely

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents