Listening Mode Preset - Integra DRX-2.3 Instruction Manual

Table of Contents

Advertisement

Setting Item
Default Value
PCM Fixed Mode
Off
• The setting cannot be changed when "Tuner", "NET", or "BLUETOOTH" input is selected.
„ Video Select
When "Tuner", "NET", or "BLUETOOTH" input is selected, you can set the input
from which video is displayed on the TV.
Setting Item
Default Value
Video Select
Last
• If the OSD language is set to Chinese, you can select this setting only when "Tuner" is
selected as input. (European, Australian, Asian and Taiwanese models)
Setting Details
Select whether to fix input signals to PCM (except
multi-channel PCM) when you select "HDMI",
"COAXIAL", or "OPTICAL" in the "Audio Select"
setting. Set this item to "On" if noise is produced or
truncation occurs at the beginning of a track when
playing PCM sources. Select "Off" normally.
• Each time the "Audio Select" setting is changed,
the setting is restored to "Off".
Setting Details
"Last": Select the video input played last.
"BD/DVD", "GAME", "CBL/SAT", "STRM BOX",
"PC", "AUX", "CD", "TV", "PHONO": Play the video
of each input.
• This setting is effective for an input selector
assigned in "1. Input/Output Assign" - "HDMI
Input" and "Video Input".
Contents
Connections

5. Listening Mode Preset

You can preset your favorite listening mode to each input. (For example, you can
always apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play
it in unchanged sound field.)
When the list of input sources is displayed, set the signal type and listening
mode.
Although it is possible to select the listening mode during playback, the selected
mode will be reset when the unit enters standby mode.
Setting Item
Default Value
Analog/PCM
All Ch Stereo
Dolby
Dolby Audio -
Surr
DTS
DTS Neural:X
Other
Dolby Audio -
Surr
• Available listening modes vary depending on speaker configuration and the input signal.
• Setting "Last Valid" will always select the last selected mode.
• Only "Analog" can be set to the "TUNER" or "AUX" input.
• "Digital" and "DSD" can be set to the "NET" input.
• Only "Digital" can be set to the "BLUETOOTH" input.
115
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
Setting Details
Set the listening mode for playing PCM signals of
CD and analog signals of record and cassette tape.
Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
• Input signals are played as they are input if you
select "Straight Decode".
Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for Blu-
ray or such other DTS-HD Master Audio source.
• Input signals are played as they are input if you
select "Straight Decode".
Set the listening mode for playing audio such as
DVD-audio and DSD signals.
• Input signals are played as they are input if you
select "Straight Decode".

Advertisement

Table of Contents
loading

Table of Contents