Integra DSR-7.3 Instruction Manual page 25

I Turning the unit on/off with the TV's power
switch — IPM function
The DVD Receiver is equipped with the Intelligent Power
Management (IPM) system.
Just turn on your TV's power switch and, in about 5 seconds,
the DVD Receiver turns on automatically. If you turn off the
TV's power switch, IPM indicator flashes on the display and
the DVD Receiver automatically turns off in about 5 minutes.
To activate the IPM function
1 Connect the audio output of your TV's audio output to the
DVD Receiver's TV/LINE IN L/R jacks (refer to page 16).
2 Press IPM on the remote controller repeatedly to turn on
the IPM indicator on the unit.
IPM
7
Theater-Dimensional
IPM
Notes
• The IPM system may not function properly with some TV sets.
• When using monaural TV, connect the audio output of the TV to
the DVD Receiver's TV/LINE IN L jack.
• When the TV is turned off while the DVD Receiver selects other
input source, the DVD Receiver does not turn off.
Before operating the
remote controller
Press Mode Recvr.
Step/ Slow
ENTER VOL
C H
Tun
T-D/ ST Muting
Surround A.Control
Repeat A- B
Late Night Timer
Audio Angle Subtitle FM Mode
Last M Program Random Clear
SP Setup Test Tone CH Sel
1 2 3
SW Mode Distance
4 5 6
IPM T- D Setup Up/ Down
IPM
7 8 9
+10 0
Search
-- / --- Enter
RC- 507 M
25 25