Integra DSR-7.3 Instruction Manual page 57

I To save a program in memory
This DVD Receiver can memorize the programs on up to 24 DVDs.
By turning the [Program Memory] to [On], the DVD Receiver will save
your program and recall it the next time you use the same DVD.
When the program memory exceeds 24, programs will be erased in
chronological order from the oldest program in memory.
1 Use the cursor button (∞) to highlight [Program Memory]
and use the cursor button (3) to select [On].
Program Chapter Program Title
Title 7 Chapter
Current:
1 (Chapter 1~18)
Title
Program Memory On
Off
Move ENTER Select PROGRAM
2 Press ENTER.
The program is saved in memory.
Note
When a DVD with a program stored in memory is loaded, program
playback may start automatically.
I To erase a program saved in memory
The DVD receiver erases programs in chronological order when the
maximum number of programs that can be held in memory is
exceeded. To prevent the DVD receiver from erasing older programs
that you may still use regularly, or when you don't want to use a
program anymore, it is possible to manually erase programs stored
in memory.
1 Load a DVD that has a program stored in memory.
2 Press Program.
The program screen appears.
3 Use the cursor button (∞) to highlight [Program Memory]
and use the cursor buttons (3/∞) to select [Off].
4 Press ENTER.
The program is cleared from memory.
If you press Clear in stop mode, the program will be cleared from
memory and [Program Memory] will be turned to [Off].
1
Exit
Before operating the
remote controller
Press Mode DVD.
VCD CD
Programming Video CDs, CDs
A program with a maximum of 24 steps can be memorized.
1
Press Program.
Program
The program screen appears. When a
Video CD or CD is loaded, the cursor
appears in the program window.
Program Track
Current:
Total Time
2
Use the number buttons to enter the
numbers of the tracks in the order
SP Setup Test Tone CH Sel
you want to program them in.
1 2 3
SW Mode Distance
• To program tracks 9, 7, and 18 in order,
4 5 6
IPM T- D Setup Up/ Down
press 9, 7, +10 and 8.
7 8 9
• To edit the program, refer to the
+10 0
-- / ---
procedures on the previous page.
3
Press ENTER or £.
• Playback starts in the specified track
ENTER
order.
• Press PROGRAM to return to the
previous display. The program play will
not begin until £ is pressed.
• To stop the program play, press 7.
Note
You cannot program when playing a Video CD using menu
selections (during PBC).
Step/ Slow
C H ENTER VOL
Tun
2/3/5/∞
T-D/ ST Muting
ENTER
Surround A.Control
£
7
Repeat A- B
Late Night Timer
Audio Angle Subtitle FM Mode
Last M Program Random Clear
Program Clear
SP Setup Test Tone CH Sel
1 2 3
Number
SW Mode Distance
4 5 6
IPM T- D Setup Up/ Down
buttons
7 8 9
+10 0 Search
-- / --- Enter
RC- 507 M
Track 1(/10)
0.00
Move Play Exit
ENTER PROGRAM
57