Integra DSR-7.3 Instruction Manual page 70

Customizing the Function Settings
Adjusting the Video Quality
You can either select a preprogrammed setting designed to
match certain program types or make adjustments to match
your own preferences and save them in the DVD receiver's
memory.
Make changes to the [Video Adjust] setting in the Setup
screen Video 2 menu.
Language General
V1 Video2
Background — Gray
Video Adjust — Start
Picture Quality Controls
Move
I Selecting a preprogrammed setting
1 Use the cursor button (3) to select [Start] then press
ENTER.
Setting items vary depending on the settings in the Setup
screen Video 1 menu.
Interlace Video Memory Select
Interlace Video Setup
2 Press ENTER.
Standard Cinema
P.Memory 1 P.Memory 2
Standard (Factory Setting)
Presents the video with no effect added.
Cinema
Delivers a cinema-like picture.
Animation
Provides images with bright clear colors.
Memory 1, Memory 2, and Memory 3
(P.Memory 1, P.Memory 2, and P.Memory 3)
These are user programmable settings. See "Adjusting the
picture quality settings" on this page and page 71 for more
information.
3 Use the cursor buttons (2/3/5/∞) to select one of the
preprogrammed picture quality settings.
If there is a DVD or Video CD playing, the effects of each setting
can be viewed while it is highlighted on the screen. This may be
useful in selecting an appropriate setting.
4 Press ENTER.
The new selection is set.
Notes
• Each picture quality setting is defined by a number of individual
settings, described in "Adjusting the picture quality settings" on
this page and page 71.
• Depending on the disc and the TV/monitor, you may not see the
effect clearly.
* Expert denotes more detailed settings. If the item is not displayed, please refer to page 67 to display it.
70
Exit
SETUP
Animation
P.Memory 3
I Adjusting the picture quality settings
– To create your own setting (1)
1 Use the cursor button (3) to select [Start] then press
ENTER.
Interlace Video Memory Select
Interlace Video Setup
2 Use the cursor button (∞) to select [Video Setup] then
press ENTER.
Interlace Video Memory Select
Interlace Video Setup
3 Use the cursor buttons (2/3) to select the setting to [On] or
[Off].
DNR off
Move Check
ENTER Select DISPLAY
4 Use the cursor buttons (5/∞) to select the setting to adjust.
You can adjust any or all of the following picture quality factors:
<When set to [Progressive] or [Auto Progressive] in the
Setup screen Video 1 menu.>
DNR
Controls the amount of signal noise in the luminance component
of the video signal.
Sharpness
Adjusts the sharpness of the mid-frequency (less detailed)
elements in the picture. (This setting is only effective when [Fine
Focus] is [On].)
Detail
Switch on to reveal greater detail (higher resolution) in the
picture.
Chroma Delay
Adjusts how saturated colours appear.
Gamma
Adjusts the brightness of the darker images in the picture.
Prog. Memory
Program the current settings.
max