Using The Late Night Function - Integra DSR-7.3 Instruction Manual

Using the LATE NIGHT Function

• The LATE NIGHT function operates when the sound is
DOLBY DIGITAL Surround.
If you play a movie at low volume at night, set this function
to "LOW" or "HIGH" to narrow the dynamic range of the
sound and make it easier to hear.
Remote controller
Press Late Night.
only
The current setting appears in the display.
Late Night
To change the setting, press the button
repeatedly while the current setting is
displayed.
• When the button is pressed while
DOLBY DIGITAL Surround sound is
being reproduced
"L.N OFF", "L.N HIGH" or "L.N LOW"
can be selected.
Note
The LATE NIGHT effect is determined by each DOLBY DIGITAL
sound source. Some sources may produce little or no effect.
Step/ Slow
C H ENTER VOL
Tun
T-D/ ST Muting
Surround A.Control
Repeat A- B
Late Night Timer
Late Night
Audio Angle Subtitle FM Mode
Last M Program Random Clear
SP Setup Test Tone CH Sel
1 2 3
SW Mode Distance
4 5 6
IPM T- D Setup Up/ Down
7 8 9
+10 0 Search
-- / --- Enter
RC- 507 M
Boosting the Super Bass Sounds/High
Frequency Sounds
You can enjoy more dynamic sounds by boosting the super
bass/high frequency sounds, even with decreased volume.
Acoustic Control
Press A. Control on the Remote
Remote controller
controller or Acoustic Control on
A.Control
the unit.
Each press of the button changes the
acoustic mode as follows:
→
"A. CTRL 1" appears in the display
and the A.CTRL indicator turns on.
Unit
The super bass sounds are boosted.
↓
"A. CTRL 2" appears in the display
and the A.CTRL indicator turns on.
The super bass sounds are further
reinforced and the high frequency
sounds are also reinforced.
↓
"A. CTRL OFF" appears in the display
and the A.CTRL indicator goes off.
Step/ Slow
C H ENTER VOL
Tun
T-D/ ST Muting
Surround A.Control
A. Control
Repeat A- B
Late Night Timer
Audio Angle Subtitle FM Mode
Last M Program Random Clear
SP Setup Test Tone CH Sel
1 2 3
SW Mode Distance
4 5 6
IPM T- D Setup Up/ Down
7 8 9
+10 0 Search
-- / --- Enter
RC- 507 M
51