Tips for installation
Installation
IMPORTANT
The hob should only be installed by a qualified installer.
Failure to observe this rule leads to cancellation of the guarantee.
The appliance must be installed correctly, in compliance with the regulations in
force and following the manufacturer's instructions.
Any repair or maintenance must be performed with the appliance switched off.
These appliances have been designed and manufactured to be fitted into heat-
resistant units.
These hobs are designed to be fitted into 600 mm deep kitchen units.
The unit walls must not be higher than the working surface and must withstand
a temperature of 75°C more than room temperature.
Avoid installation near inflammable materials (e.g. curtains).
Figure 9
10