Electrical Connection - CDA CD 60 User Operating Instructions Manual

IMPORTANT: The installation must be made following the manufacturer's
instructions and in accordance with existing laws.
Incorrect installation may be dangerous and the manufacturer can not be
held responsible.
Warning! This appliance must be earthed
A properly earthed three pin plug (fused at 3 amps, to BS 1362 ASTA approved) must
be used. As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug, proceed
as follows.
The wire which is coloured GREEN & YELLOW must be connected to the terminal in
the plug which is marked with letter "E" or by the Earth symbol or coloured GREEN
& YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked
with the letter "N" or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is
marked with the letter "L" or coloured RED.
18

Electrical Connection

Figure 20
Green &
Yellow
Earth
Blue Neutral
3 amp fuse
Brown Live