Correct Positioning Of The Burners - CDA CD 60 User Operating Instructions Manual

CORRECT POSITIONING OF THE BURNERS

It is very important to check that spreader F and cap C of the burner (see Figure 6) are
perfectly in place because if they move out of place serious problems could arise.
Make sure that electrode "S" (Fig. 6) is kept clean so that the sparks always strike.
TRIPLE-RING BURNER
The triple ring burner must be correctly positioned (see fig. 7); the burner rib must be
located in position as shown by the arrow.
The burner correctly positioned must not rotate (fig. 8).
Then position the cap A and the ring B (fig. 8).
Figure 6
C
F
S
Figure 7
Figure 8
A
B
9