Cleaning And Maintenance; General Tips - CDA CD 60 User Operating Instructions Manual

GENERAL TIPS

Before cleaning the hob switch it off and wait for it to cool down.
Clean with a cloth, hot water and soap or liquid detergent.
Do not use products which are abrasive, corrosive or chlorine based.
Do not use steel pads.
Do not leave acid or alkaline substances (vinegar, salt, lemon juice, etc.) on the
hob.
ENAMELLED PARTS
All the enamelled parts must be washed only with a sponge with soapy water or
other non-abrasive products.
Dry carefully.
STAINLESS STEEL HOB
Clean with special products which are available on the market.
Dry preferably with chamois leather.
Note: regular use will cause discolouring around the burners, because of the high
flame temperature.
BURNERS AND GRIDS
These pieces can be removed and washed with suitable products.
After cleaning burners and spreaders dry them well and replace them correctly.
In appliances with electric ignition keep the electrode clean so that the sparks
always strike.
Note: To avoid damage to the electric ignition do not use it when the burners
are not in place.
GAS TAPS
Regular lubrication of the gas taps must only be performed by specialised engineers.
If the gas taps are not working properly call the After-Sales Service.
8

Cleaning and Maintenance